When your washing machine stops mid-cycle with wet clothes inside, you need a clear solution. We repair front-loading and top-loading automatic washing machines, as well as conventional twin-tub models.
Send us the error code on the display via WhatsApp. Many codes provide an initial indication of the problem before the technician arrives.
The problem may be with the power supply, door lock, electronic control board or power switch.
A motor belt, motor or balance sensor fault, or water that has not drained first, may prevent spinning.
A blocked pump filter or hose, or a failed drain pump, are among the most common causes.
Leaks can come from the door seal, hoses, pump or detergent drawer.
Possible causes include an unbalanced load, an uneven floor or worn shock absorbers and springs.
Grinding during the spin cycle may be related to the bearings, while clicking may indicate a trapped object.
The door can remain locked if water is still in the drum or the lock itself has failed.
The tap may be closed, the water inlet filter blocked or the electrically operated inlet valve faulty.
Water supply, drainage and door error codes vary by manufacturer and help with diagnosis.
The pump makes noise but does not move water, or does not run at all.
Automatic washing machines rely on an electronic control board, sensors and an electric door lock, and many faults appear as a code on the display. Conventional twin-tub machines more often develop mechanical faults involving the timer, motor, belt or drainage system.
In either case, the technician first checks the part linked to the symptoms and does not replace parts without a clear reason.
We take Washing Machine Repair requests from the Capital, Hawalli, Farwaniya, Ahmadi, Jahra and Mubarak Al-Kabeer governorates. Visits are scheduled based on your area and technician availability, and we confirm the appointment by phone or WhatsApp.
Yes, we repair front-loading and top-loading automatic washing machines, as well as conventional models.
The water may not have drained fully, the load may be unbalanced, or there may be a belt, motor or sensor fault. The technician checks drainage first, then the drive system.
The most common causes are a blocked pump filter or drain hose, or a failed pump.
Wait a few minutes, as some machines delay releasing the lock. If water remains in the drum, the problem is often drainage. Do not force the door open.
Yes. Send the code and machine type via WhatsApp to 97935093 so we can get an initial idea of the fault.
Call now and tell us the appliance type and the fault, or send a photo of the device or the error code on WhatsApp so we understand the problem before the visit.
هل تريد موقعًا احترافيًا لنشاطك التجاري، أو حملات إعلانات جوجل تجلب لك اتصالات حقيقية، أو إضافة رقم هاتفك وخدماتك على موقع جاهز؟ تواصل معنا مباشرة.
